HP Brocade 8/12c Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01 - Page 165

Software Configuration 4 • Enterprise Medium : 1500 MB • Enterprise Large : 2048 MB NOTE There is no restriction on the maximum value for Server Heap Size in a 64-Bit Server. The correct server heap size value must be given according to the RAM present in the server. 6. Click Apply or OK to save your work. NOTE Changes to this option take effect after an application restart. NOTE You can only restart the server using the Server Management Console (Start > Programs > Management_Application_Name 11.X.X > Server Management Console). 7. Click OK on the "changes take effect after application restart" message. Configuring asset polling NOTE Asset polling is only applicable for SAN products. Asset polling allows you set the length of time between state change polling. To maximize the efficiency of the polling feature (balance the amount of possible information with any possible performance impact), base your settings on the size of the SAN. To configure asset polling, complete the following steps. 1. Select Server > Options. The Options dialog box displays. 2. Select Memory Allocation in the Category list to set the memory allocation for the server and client. 3. Enter how often you want to check for state changes in the Check for state change every field. You cannot enter a value lower than the default minimum value. Default for Professional is 60 seconds. Default minimum values are as follows: • Small: 60 seconds • Medium: 120 seconds • Large: 180 seconds 4. Enter how often (default is 120 seconds) you want to check for state changes in the If no state change, Poll switch every field. Default values are as follows: • Small: 120 seconds • Medium: 900 seconds • Large: 1800 seconds Brocade Network Advisor SAN User Manual 121 53-1002167-01