HP Brocade 8/12c Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01 - Page 262

9 AAA Settings • Know the TCP port you are using. For Radius servers, ports 1812 or 1645 (actually UDP ports) are commonly used. Check with the Radius server vendor if you are not sure which port to specify. • Know how long you want to wait between attempts to reach the server if it is busy. This is expressed as a timeout value (default is 3 seconds) in seconds. Values are between 1 and 15. • Determine how many attempts (default is 3 times) to make to reach the server before stopping and assuming it is unreachable. Values are between 1 and 5. • If possible, establish an active connection with the Radius server before configuration. This enables you to test the connection as part of the configuration procedure. 1. Select the AAA Settings tab (Figure 75). FIGURE 75 AAA Settings tab 2. For Primary Authentication, select Radius Server. 3. Click Add. The Add or Edit Radius Server dialog box displays (Figure 76). FIGURE 76 Add or Edit Radius Server 4. Enter the radius server's IP address in the IP Address field. 5. Enter the TCP port, if necessary, used by the Radius server in the TCP Port field. Default is 1812. 218 Brocade Network Advisor SAN User Manual 53-1002167-01