HP Brocade 8/12c Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01 - Page 899

30 SNMP traps • Warning • Notice • Info • Debug Traps with the selected severity and those with higher severity levels are forwarded. For example, by default, Critical severity is selected. Therefore, traps with Critical, Alert, and Emergency severity levels are forwarded. To have all traps forwarded, select Debug, the lowest severity level. 9. By default, all traps are listed in the Available Traps list, under the folders for the MIB to which they belong. You can limit the list by selecting one of the following MIB types: • MIB Information - click the check box if you want the default SNMP name for the traps to be displayed. • MIB Alias - click the check box if you want the aliases for traps to be displayed. 10. After limiting the list of available traps, expand the MIB folder to which the trap you want belongs under the Available Trap Type list and select that trap. Click the right arrow button to move it to the Selected Trap Type list. 11. Click OK. Event reception The Event Reception feature provides an interface to add the credentials and community strings required to decode traps. You can use the Event Reception dialog box to configure the trap message, severity, and alias name that is used by the Event Processor. The Event Reception dialog box contains two tabs: • The Trap Credentials tab allows you to configure the server to accept or drop SNMP traps and add SNMP credentials and community strings for decoding traps. • The Trap Configuration tab allows you to customize the trap description or message, severity, and alias name. To access the Event Reception dialog box, select Monitor > SNMP > Event Reception. The Event Reception dialog box displays. Brocade Network Advisor SAN User Manual 855 53-1002167-01