HP Brocade 8/12c Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01 - Page 516

18 Steps for connecting to a TKLM appliance For Windows: \ibm\tivoli\tiptklmV2\bin\wsadmin.bat -username TKLMAdmin -password -lang jython 2. Check the certificate list using the following command: print AdminTask.tklmCertList('[]') The listing will contain the uuid for all certificates. Use the uuid of the server certificate to export the server certificate from the database to the file system. print AdminTask.tklmCertExport('[ -uuid -fileName -format DER]') 3. Exit the wsadmin CLI After export, the TKLM server certificate is at the following location: For LINUX: /ibm/tivoli/tiptklmV2/products/tklm/ For Windows: \ibm\tivoli\tiptklmV2\products\tklm\ 4. Transfer the TKLM certificate that was previously exported into the TKLM server file system to the Management application host using any binary file transfer mechanism via SCP, USB, or FTP. Importing the TKLM certificate into the group leader The TKLM certificate must be imported from the location on the host to the encryption group leader node. The encryption group leader exports the certificate to group member switches. 1. Select Configure > Encryption from the menu task bar. The Encryption Center dialog box displays (Figure 153). 2. Select a switch from the Encryption Center Devices table, then select Switch > Import Certificate from the menu task bar, or right-click the switch and select Import Certificate. The Import Signed Certificate dialog box displays (Figure 174). FIGURE 174 Import Signed Certificate dialog box 3. Browse to the location where the signed certificate is stored. 4. Click OK. The signed certificate is stored on the switch. 472 Brocade Network Advisor SAN User Manual 53-1002167-01