HP CP6015dn Service Manual - Page 498
Table 7-22, Causes and solutions for pickup delay jam continued
UPC - 883585363018
View all HP CP6015dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 498 highlights
Table 7-22 Causes and solutions for pickup delay jam (continued) Cause Solution Poor contact of the Tray-3 media-feed-sensor Reconnect the connectors of the Tray-3 media-feed sensor (J2102), connector intermediate (J1982) and the Tray-3 paper-deck driver PCA (J8106A). The Tray-3 media-feed sensor for is defective Check the Tray-3 media-feed sensor via the sensor monitor mode. If the sensor is defective, replace the pickup-plate unit. The spring of the Tray-3-pickup-solenoid arm Check the spring and place it in the correct position. is unhooked Poor contact of the Tray-3-pickup-solenoid drive connector Reconnect the connectors of the Tray-3 pickup solenoid (J1983) and the Tray-3 paper-deck driver PCA (J8107A). The Tray-3 pickup solenoid is defective Execute the Tray-3-pickup-solenoid driving test in the actuator drive mode. If the solenoid is defective, replace the pickup solenoid. Poor contact of the Tray-3 pickup-motor drive Reconnect the connectors of the Tray-3 pickup motor (J1751) and the Tray-3 connector paper-deck driver PCA (J8107A). The Tray-3 pickup motor is defective Execute the Tray-3-pickup-motor driving test in the actuator drive mode. If the motor is defective, replace the pickup motor. Poor contact of the Tray-4 media-feed-sensor Reconnect the connectors of the Tray-4 media-feed sensor (J2112), connector intermediate (J1985) and the Tray-4 paper-deck driver PCA (J8106B). The Tray-4 media-feed sensor is defective Check the Tray-4 media-feed sensor via the sensor monitor mode. If the sensor is defective, replace the pickup-plate unit. The spring of the Tray-4-pickup-solenoid arm Check the spring and place it in the correct position. is unhooked Poor contact of the Tray-4-pickup-solenoid drive connector Reconnect the connectors of the Tray-4 pickup solenoid (J1986) and the Tray-4 paper-deck driver PCA (J8107B). The Tray-4 pickup solenoid is defective Execute the Tray-4-pickup-solenoid driving test in the actuator drive mode. If the solenoid is defective, replace the pickup solenoid. Poor contact of the Tray-4 pickup-motor drive Reconnect the connectors of the Tray-4 pickup motor (J1752) and the Tray-4 connector paper- deck driver PCA (J8107B). The Tray-4 pickup motor is defective Execute the Tray-4-pickup-motor driving test in the actuator drive mode. If the motor is defective, replace the pickup motor. Poor contact of the Tray-5 media-feed-sensor Reconnect the connectors of the Tray-5 media-feed sensor (J2122), connector intermediate (J1988) and the Tray-5 paper-deck driver PCA (J8106C). The Tray-5 media-feed sensor is defective Check the Tray-5 media-feed sensor via the sensor monitor mode. If the sensor is defective, replace the pickup-plate unit. The spring of the Tray-5-pickup-solenoid arm Check the spring and place it in the correct position. is unhooked Poor contact of the Tray- 5-pickup-solenoid Reconnect the connectors of the Tray-5 pickup solenoid (J1989) and the Tray-5 drive connector paper-deck driver PCA (J8107C). The Tray-5 pickup solenoid is defective Execute the Tray-5-pickup-solenoid driving test in the actuator drive mode. If the solenoid is defective, replace the pickup solenoid. Poor contact of the Tray-5 pickup-motor drive Reconnect the connectors of the Tray-5 pickup motor (J1753) and the Tray-5 connector paper-deck driver PCA (J8107C). The Tray-5 pickup motor is defective Execute the Tray-5-pickup-motor driving test in the actuator drive mode. If the motor is defective, replace the pickup motor. 456 Chapter 7 Solve problems ENWW