HP CP6015xh HP Color LaserJet CP6015 Series - User Guide - Page 119
Con the accessory operation mode, Select the operating mode at the control panel
UPC - 883585363544
View all HP CP6015xh manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Figure 7-4 Booklet maker finisher dimensions 1104.9 mm (43.5 in) (62145.2m5min) 635(2m5min) 1626 mm (64 in) 75 kg 165.3 lb 40(166minm) Configure the accessory operation mode Select the operating mode at the control panel You can set the operating mode for the 3-bin stapler/stacker or the booklet maker finisher at the product control panel. 1. At the control panel, press Menu. 2. Press the down arrow to highlight the CONFIGURE DEVICE menu, and then press the checkmark button . 3. Press the down arrow to highlight the MBM-3 BIN STAPLER menu or MULTIFUNCT FINISHER, and then press the checkmark button . 4. Press the down arrow to highlight OPERATION MODE, and then press the checkmark button . 5. Select the operation mode that you want to use. ● When Mailbox Mode is used, each bin is assigned to a user or group of users. Every time a user sends a print job, the job is routed to the assigned bin. ● When Stacker Mode is used and the optional 3-bin stapler/stacker is installed, the three bins act as a single bin. When one bin is full, jobs are automatically routed to the next bin. When Stacker Mode is used and the booklet maker finisher is installed, the two upper bins act as a single bin, and the third bin is reserved for booklets. NOTE: Use the product embedded Web server to assign output bins to users or groups of users. For more information see Embedded Web server on page 142 ENWW Choose an output location 105