HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 207
The currently advertised virtual domain in the VSAN shown in the error message is
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IVR-2-NO_LICENSE_WARNING: Inter-VSAN Routing would shutdown in [dec] seconds. Explanation License required for continued IVR operation is not available. Unless the required license is installed, IVR will shut down in the number of seconds shown in the error message. IVR configurations will be lost. Recommended Action Install the appropriate license for IVR services within the shown seconds to continue uninterrupted operation. Introduced Cisco MDS SAN-OS Release2.0(1b). Error Message IVR-2-PERSISTENT_VIRTUAL_FCID_UNAVAILABLE: to vsan [dec] because the configured persistent virtual domain/fcid could not be assigned. Explanation This can happen if the virtual domain/FC ID configured by the user is already in use (either by IVR or a switch) or not allowed because of the interop mode or allowed domain list configured. Recommended Action Verify that the configured virtual domain/FC ID is allowed and available for use. Introduced Cisco MDS SAN-OS Release 2.1(2). Error Message IVR-2-VIRTUAL_DOMAIN_CONFLICT: In VSAN [dec] virtual domain [dec] from native VSAN [dec] conflicts with native VSAN [dec] for the same virtual domain. Explanation The currently advertised virtual domain in the VSAN shown in the error message is native to different VSAN. This switch has learned of a device that is a member of the active IVR zone and has the same domain ID, but belongs to a different native VSAN. This device is not advertised in that VSAN until the domain conflict is resolved. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IVR-2-VIRTUAL_FCID_UNAVAILABLE: to vsan [dec] because the internally generated FCID conflicts with fcid assigned to WWN [chars]. Please configure fcid for WWN [chars] too. Explanation This can happen if the virtual domain/FCID internally configured is already in use by another active device. Recommended Action Assign a different persistent virtual FCID. Introduced Cisco MDS SAN-OS Release 3.2(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-171