HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 397
Svc_battery-slot#-4, Svc_battery-slot#-6
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 397 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC_BATTERY-SLOT#-2-CONDITIONING_DISABLED: Temperature outside permitted range for battery conditioning (5C-40C). Explanation The temperature of the line card is not within the range to permit battery conditioning. Recommended Action Make sure the temperature of the line card is between 5 and 400C. Error Message SVC_BATTERY-SLOT#-2-DISCHARGING_FAILURE: Discharging failure in battery [dec] ([hex]). Explanation The module encountered failures while discharging a battery. Recommended Action Replace the battery. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(4a). SVC_BATTERY-SLOT#-4 Error Message SVC_BATTERY-SLOT#-4-BATTERY_CAPACITY_LOW: Battery capacity is below the required threshold. Explanation The battery is lower than the required threshold. Recommended Action Make sure the temperature is within the range to allow charging. Introduced Cisco MDS SAN-OS Release 1.3(1). SVC_BATTERY-SLOT#-6 Error Message SVC_BATTERY-SLOT#-6-BATTERY_CAPACITY_OK: Battery capacity is above the required threshold. Explanation The battery is above the required threshold. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC_BATTERY-SLOT#-6-CONDITIONING_CANCELLED: Temperature outside permitted range for battery conditioning (5C-40C). Battery [dec] conditioning cancelled. Explanation The temperature of the module is not within the range to permit battery conditioning. Recommended Action Make sure the temperature of the line card is between 5 and 400C. Introduced Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-361