HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 332
SCSI target Messages, SCSI target-2
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 332 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] SCSI target Messages This section contains the SCSI target (SCSI target) messages. SCSI target-2 Error Message SCSI target-2-PROC_ADD_NPORT_FAIL: Failed to set local nport with SCSI target driver error: [hex]. Explanation SCSI target process added an N port with its peer kernel driver listed. No SCSI discovery can be performed. Recommended Action Enter the show SCSI target internal driver CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message SCSI target-2-PROC_OPEN_VHBA_DEVICE_FAIL: Failed to communicate with SCSI target driver error: [hex]. Explanation SCSI target process failed to communicate with its peer kernel driver listed in the error message. No SCSI discovery can be performed. Recommended Action Enter the show SCSI target internal driver command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message SCSI target-2-PROC_SET_SCSI_INDEX_FAIL: Failed to set SCSI index SCSI target driver error: [hex]. Explanation SCSI target process failed to set SCSI index with its peer kernel driver. No SCSI discovery can be performed. Recommended Action Enter the show SCSI target internal driver command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message SCSI target-2-PROC_WWNM_GET_WWN_FAIL: Failed to get local controller pwwn from WWN Manager error: [hex] response: [hex]. Explanation SCSI target process used the wwnm_bwt_get_local_controller_wwn() API for the port WWN and it failed because of the error and response code listed. No SCSI discovery can be performed. Recommended Action Enter the show process cpu and show system internal sysmgr service all commands or use a similar Fabric Manager/Device Manager procedure to collect further information. See WWN Manager system error codes for the reason. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-296 Cisco MDS 9000 Family System Messages Reference OL-15956-01