HP Cisco MDS 9020 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 436
Cisco MDS SAN-OS Release 3.13., Check the compact flash on the board and any relevant system
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 436 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-2-OHMS_SUP_CF_REFLASH_FAILED: Compact Flash firmware refresh procedure failed, replace the compact flash on module [dec]. Reason: [char]. Explanation Compact Flash firmware corrupted. Recommended Action Schedule a downtime and replace the compact flash on the affected module. Introduced Cisco MDS SAN-OS Release 3.1(3). Error Message SYSTEMHEALTH-2-OHMS_SUP_CF_CRC_INIT_ERRORS: Compact Flash firmware CRC checksum procedure encountered an error during initialization on module [dec]. Reason: [chars]. Explanation Compact flash CRC checksum initializations failed. Recommended Action Check the compact flash on the board and any relevant system (mis)configurations. Introduced Cisco MDS SAN-OS Release 3.3(1a). Error Message SYSTEMHEALTH-2-OHMS_SWITCH_RELOAD_REQ: Switch reload request due to errors found [chars] test. Explanation System Health switch reload request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SYSTEMHEALTH-2-OHMS_SWITCHOVER_REQ: Supervisor switch over being requested due to errors found [chars] test. Explanation System Health switchover request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SYSTEMHEALTH-2-OHMS_TCAM_PARITY_FAILED: TCAM test failed for module [dec]. Explanation TCAM test failed for module as uncorrectable parity errors detected. Recommended Action Schedule a downtime and replace the compact flash on the affected module. Introduced Cisco MDS SAN-OS Release 3.3(1a). 2-400 Cisco MDS 9000 Family System Messages Reference OL-15956-01