HP Cluster Platform Introduction v2010 HP Cluster Platform Server and Workstat - Page 132

Table 3-10 HP ProLiant DL385 G2 PCI Express Slot Assignments Slot Assignment 1 PCI Express 2 PCI Express 3 PCI Express 4 PCI Express 5 PCI Express Interconnect Comment x8 x8 x4 x8 x8 Table 3-11 summarizes a PCI Express/PCI-X mixed configuration. Table 3-11 HP ProLiant DL385 G2 PCI Express/PCI-X Slot Assignments Slot Assignment 1 PCI Express 2 PCI Express 3 PCI Express Interconnect 4 PCI 5 PCI Express Interconnect Comment x8 x8 x8 64-Bit 133 MHz 64-Bit 133 MHz 3.5.3 New DL385 G2 PCI Slot Assignments (as of March 17, 2008) The following table describes the new PCI slot assignments for DL385 G2 as of March 17, 2008. The are no performance issues with the previous slot assignments and it is not necessary to move the HCAs in previously sold configurations. When a PCI-X HCA is used, use Table 3-11. Table 3-12 HP ProLiant DL385 G2 PCI-Express Slot Assignments (as of March 17th 2008) Slot Assignment 1 PCI-Express 2 PCI-Express 3 PCI-Express 4 PCI-Express (Interconnect) 5 PCI-Express Comment x8 x8 x4 x8 x8 3.5.4 Removing the ProLiant DL385 G2 from a Rack To access internal components in the ProLiant DL385 G2, you must first power down the server and then remove it from the rack. All of the servers in the HP Cluster Platform configuration are secured to the rack on a sliding rail. To remove the HP ProLiant DL385 G2 from a rack, follow these steps: Warning! To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the power cord to remove power from the server. The front panel Power On/Standby button does not completely shut off system power. Portions of the power supply and some internal circuitry remain active until AC power is removed. 1. Back up the server data and power off the server. 2. Shut down the operating system as directed by your operating system documentation. 132 Opteron Processor Servers