HP Color LaserJet CM4730 Service Manual - Page 109

E-mail Setup Administration > Initial Setup > E-mail Setup Use this menu to enable the e-mail feature and to configure basic e-mail settings. NOTE: To configure advanced e-mail settings, use the embedded Web server. For more information, see Embedded Web server on page 104. Table 3-13 E-mail Setup menu Menu item Values Address Validation On (default) Off Find Send Gateways SMTP Gateway Enter a value. Test Send Gateway Description This option enables the device to check e-mail syntax when you type an e-mail address. Valid e-mail addresses require the "@" sign and a ".". Search the network for SMTP gateways that the device can use to send e-mail. Specify the IP address of the SMTP gateway that is used to send email from the device. Test the configured SMTP gateway to see if it is functional. Send Setup menu Administration > Initial Setup > Send Setup Table 3-14 Send Setup menu Menu item Values Replicate MFP Enter a value (IP Address). Allow Transfer to New DSS Off On (default) Allow Use of Digital Send Service Off On (default) Fax Number Confirmation Disable (default) Enable Description Copy the local Send settings from one device to another. Use this feature to allow the transfer of the device from one HP Digital Sending Software (DSS) server to another. HP DSS is a software package that handles digital sending tasks such as faxing, e-mail, and sending a scanned document to a network folder. This feature allows you to configure the device for use with an HP Digital Sending Software (DSS) server. When fax number confirmation is enabled, you are prompted to enter the fax number twice to verify that it has been typed correctly. Device Behavior menu Administration > Device Behavior Table 3-15 Device Behavior menu Menu item Sub-menu item Sub-menu item Language Values Description Select the language Select a different language for control-panel from the list. messages. When you select a new ENWW Control-panel menus 89