HP Color LaserJet Managed MFP E47528 Color LaserJet Managed MFP E47528 User Gu - Page 183

Troubleshoot image defects, Table 9-6

Page 183 highlights

Table 9-6 Color plane registrations defects (color models only) Sample Description Possible solutions One or more color plane(s) is not aligned with the other color planes. This registration 1. error will typically occur with yellow. 2. Reprint the document. From the printer control panel, calibrate the printer. 3. If a cartridge has reached a Very Low state, or the printed output is severely faded, replace the cartridge. 4. From the printer control panel use the Restore Calibration feature to reset the printer's calibration settings to the factory defaults. 5. If the issue persists, go to support.hp.com. Table 9-7 Fixing/fuser defects Sample Description Slight shadows or offsets of the image are repeated down the page. The repeated image might fade with each recurrence. Possible solutions 1. Reprint the document. 2. Check the paper type in the paper tray and adjust the printer settings to match. If necessary, select a lighter paper type. 3. If the issue persists, go to support.hp.com. Toner rubs off along either edge of the page. This defect is more common at the 1. edges of high-coverage jobs, and on light media types, but can occur anywhere on the 2. page. Reprint the document. Check the paper type in the paper tray and adjust the printer settings to match. If necessary, select a heavier paper type. 3. Enterprise models only: From the printer control panel, go to the Edge­ to-Edge menu and then select Normal. Reprint the document. 4. Enterprise models only: From the printer control panel, select Auto Include Margins and then reprint the document. 5. If the issue persists, go to support.hp.com. Troubleshoot image defects 171

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238

Table 9-6
Color plane registrations defects (color models only)
Sample
Description
Possible solutions
One or more color plane(s) is not aligned
with the other color planes. This registration
error will typically occur with yellow.
1.
Reprint the document.
2.
From the printer control panel,
calibrate the printer.
3.
If a cartridge has reached a
Very Low
state, or the printed output is severely
faded, replace the cartridge.
4.
From the printer control panel use the
Restore Calibration
feature to reset
the printer's calibration settings to the
factory defaults.
5.
If the issue persists, go to
support.hp.com
.
Table 9-7
Fixing/fuser defects
Sample
Description
Possible solutions
Slight shadows or offsets of the image
are repeated down the page. The repeated
image might fade with each recurrence.
1.
Reprint the document.
2.
Check the paper type in the paper
tray and adjust the printer settings to
match. If necessary, select a lighter
paper type.
3.
If the issue persists, go to
support.hp.com
.
Toner rubs off along either edge of the
page. This defect is more common at the
edges of high-coverage jobs, and on light
media types, but can occur anywhere on the
page.
1.
Reprint the document.
2.
Check the paper type in the paper
tray and adjust the printer settings to
match. If necessary, select a heavier
paper type.
3.
Enterprise models only:
From the
printer control panel, go to the
Edge²
to-Edge
menu and then select
Normal
.
Reprint the document.
4.
Enterprise models only:
From the
printer control panel, select
Auto
Include Margins
and then reprint the
document.
5.
If the issue persists, go to
support.hp.com
.
Troubleshoot image defects
171