HP Color LaserJet Pro M453-M454 User Guide - Page 106

Setup, Paper setup, Paper Type, Printer Maintenance, Print Quality Tools, Cleaning

Page 106 highlights

1. If paper has jammed in the printer, clear the jam and then print a configuration page to test the printer. 2. Check that the tray is configured for the correct paper size and type on the printer control panel. Adjust paper settings if necessary. a. Navigate to the Setup menu as follows. ● Touchscreen control panel: From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon . ● 2-line control panel: Press the OK button to display the Home screen. Use the arrow buttons to navigate to Setup, and then press the OK button again. b. Open the Paper setup menu. c. Select the tray from the list. d. Select Paper Type and then select the type of paper that is in the tray. e. Select Paper Size and then select the size of paper that is in the tray. 3. Turn the printer off, wait 30 seconds, and then turn it on again. 4. Print a cleaning page to remove excess toner from inside the printer. a. Navigate to the Setup menu as follows. ● Touchscreen control panel: From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon . ● 2-line control panel: Press the OK button to display the Home screen. Use the arrow buttons to navigate to Setup, and then press the OK button again. b. Open the following menus: 1. Printer Maintenance 2. Print Quality Tools 3. Cleaning Page 2-line control panel: Press OK. c. Load plain letter or A4 paper when you are prompted. Wait until the process is complete. Discard the page that prints. 5. Print a configuration page to test the printer. a. Navigate to the Setup menu as follows. ● Touchscreen control panel: From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon . ● 2-line control panel: Press the OK button to display the Home screen. Use the arrow buttons to navigate to Setup, and then press the OK button again. b. Open the following menus: 96 Chapter 6 Solve problems ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142

1.
If paper has jammed in the printer, clear the jam and then print a configuration page to test the printer.
2.
Check that the tray is configured for the correct paper size and type on the printer control panel. Adjust
paper settings if necessary.
a.
Navigate to the
Setup
menu as follows.
Touchscreen control panel
: From the Home screen on the printer control panel, swipe the tab at
the top of the screen downward to open the Dashboard, and then touch the Setup icon
.
2-line control panel:
Press the
OK
button to display the Home screen. Use the arrow buttons to
navigate to
Setup
, and then press the
OK
button again.
b.
Open the
Paper setup
menu.
c.
Select the tray from the list.
d.
Select
Paper Type
and then select the type of paper that is in the tray.
e.
Select
Paper Size
and then select the size of paper that is in the tray.
3.
Turn the printer off, wait 30 seconds, and then turn it on again.
4.
Print a cleaning page to remove excess toner from inside the printer.
a.
Navigate to the
Setup
menu as follows.
Touchscreen control panel
: From the Home screen on the printer control panel, swipe the tab at
the top of the screen downward to open the Dashboard, and then touch the Setup icon
.
2-line control panel:
Press the
OK
button to display the Home screen. Use the arrow buttons to
navigate to
Setup
, and then press the
OK
button again.
b.
Open the following menus:
1.
Printer Maintenance
2.
Print Quality Tools
3.
Cleaning Page
2-line control panel:
Press
OK
.
c.
Load plain letter or A4 paper when you are prompted.
Wait until the process is complete. Discard the page that prints.
5.
Print a configuration page to test the printer.
a.
Navigate to the
Setup
menu as follows.
Touchscreen control panel
: From the Home screen on the printer control panel, swipe the tab at
the top of the screen downward to open the Dashboard, and then touch the Setup icon
.
2-line control panel:
Press the
OK
button to display the Home screen. Use the arrow buttons to
navigate to
Setup
, and then press the
OK
button again.
b.
Open the following menus:
96
Chapter 6
Solve problems
ENWW