HP Color LaserJet Pro M453-M454 User Guide - Page 88
Link speed and duplex settings, Setup, Network Setup, Ethernet Settings, Link Speed
![]() |
View all HP Color LaserJet Pro M453-M454 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
4. Use the arrow buttons to enter the Subnet Mask and then press OK. 5. Use the arrow buttons to enter the Gateway and then press OK. Link speed and duplex settings The link speed and communication mode of the print server must match the network hub. For most situations, leave the printer in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the printer from communicating with other network devices. If you need to make changes, use the printer control panel. NOTE: This information applies only to Ethernet (wired) networks. It does not apply to wireless networks. NOTE: The printer setting must match the setting for the network device (a network hub, switch, gateway, router, or computer). NOTE: Making changes to these settings causes the printer to turn off and then on. Make changes only when the printer is idle. 1. Navigate to the Setup menu: ● Touchscreen control panel: From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon . ● 2-line LCD control panel: Press the OK button to display the Home screen. Use the arrow buttons to navigate to Setup, and then press the OK button again. 2. From the Setup menu, touch or use the arrow buttons and the OK button to open the following menus: 1. Network Setup 2. Ethernet Settings 3. Link Speed 3. On the Link Speed menu, navigate to and select one of the following options: Setting Automatic 10T Full 10T Half 100TX Full 100TX Half 1000T Full Description The print server automatically configures itself for the highest link speed and communication mode allowed on the network. 10 Mbps, full-duplex operation 10 Mbps, half-duplex operation 100 Mbps, full-duplex operation 100 Mbps, half-duplex operation 1000 Mbps, full-duplex operation 4. Select OK to save the setting. The printer turns off and then on. 78 Chapter 5 Manage the printer ENWW
![](/manual_guide/products/hewlettpackard-color-laserjet-pro-m453m454-user-guide-316ba74/88.png)