HP DL585 ProLiant DL585 Generation 2 Server User Guide - Page 43
Installing DVD, CD-ROM, or diskette drives
UPC - 882780448322
View all HP DL585 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3. Close the ejector lever. 4. Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations ("SAS and SATA hard drive LED combinations" on page 10). Installing DVD, CD-ROM, or diskette drives The server is shipped with one DVD drive. You can install an optional DVD drive, CD-ROM drive, or a 3.5-inch diskette drive. To install an optional media drive: 1. Power down the server (on page 27). 2. Use the T-15 Torx screwdriver to eject the drive or drive blank, and pull it out of the server. NOTE: The T-15 Torx screwdriver is shipped with the server and can be located on the rear panel ("Rear panel components" on page 11). Hardware options installation 43
Hardware options installation 43
3.
Close the ejector lever.
4.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations ("
SAS and
SATA hard drive LED combinations
" on page
10
).
Installing DVD, CD-ROM, or diskette drives
The server is shipped with one DVD drive. You can install an optional DVD drive, CD-ROM drive, or a
3.5-inch diskette drive.
To install an optional media drive:
1.
Power down the server (on page
27
).
2.
Use the T-15 Torx screwdriver to eject the drive or drive blank, and pull it out of the server.
NOTE:
The T-15 Torx screwdriver is shipped with the server and can be located on the rear
panel ("
Rear panel components
" on page
11
).