HP DeskJet 3700 User Guide - Page 94
Control panel ink error status, Light behavior, Cause and Solution, Number of copies, Resume
View all HP DeskJet 3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Light behavior Cause and Solution The Number of copies icon is alternating between the letter E There is a paper jam. and the number 4. At the same time, the Resume light is blinking. Clear the jam, and then press the Resume button ( ) to continue printing. For more information, see Jams and paper-feed issues on page 70. The Number of copies icon is alternating between the letter E and the number 5. At the same time, all lights on the control panel are blinking. The scanner is not working. Turn off and turn on the printer. If the problem persists, contact HP. The printer still prints even if the scanner is not working. The Number of copies icon is alternating between the letter E and the number 6. The printer is in an error state. 1. Turn off the printer. 2. Unplug the power cord. 3. Wait a minute, and then plug the power cord back in. 4. Turn on the printer. If the problem persists, contact HP. Control panel ink error status ● Light behavior Cause and Solution One of the Ink Level icons is blinking with no segment, and the One of the following might have occurred. Ink Alert light is on. - The corresponding cartridge is missing. If one of the cartridges is missing, the printer enters single cartridge mode. To exit the single cartridge mode, insert the corresponding cartridge. For more information about the single cartridge mode, see Use single cartridge mode on page 52. - The corresponding cartridge is installed improperly, or still has plastic tape on it. Remove the corresponding cartridge, make sure there is no plastic tape on it, and then reinsert the cartridge securely. For more information, see Replace cartridges on page 50. 90 Chapter 8 Solve a problem ENWW