HP Deskjet 950/952c (English) Windows Connect * User's Guide - C6428-90035 - Page 48
Normal, Draft, Advanced, Print in Grayscale, Setup tab. See Setup Tab
View all HP Deskjet 950/952c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4 Getting Help When Things Go Wrong Is there a problem with your printout? continued What is the problem? Possible cause To solve the problem... Print quality is poor. You may not be using the best media. • Make sure that you are using media intended for HP DeskJet printers. • Print quality is dramatically improved if you print on paper specifically designed for a certain output (photographs, for example), rather than using plain paper. You may be printing on the wrong side of the media. Make sure that the media is loaded print side down. You may not have selected the correct paper type in the printer software. Make sure that you have selected the correct paper type in the Setup tab. See "Setup Tab" on page 6. You may be printing in Draft mode. If you have smearing, you may be using too much ink. You may be printing in grayscale. You may be running out of ink. Click Normal or Best instead of Draft on the Setup tab. See "Setup Tab" on page 6. 1 Click Normal or Draft instead of Best on the Setup tab. See "Setup Tab" on page 6. 2 Reduce the amount of ink by going to the Advanced tab and using the Ink Volume slider. See "Advanced Tab" on page 7. 3 Increase the dry time by going to the Advanced tab and using the Dry Time slider. See "Advanced Tab" on page 7. Uncheck Print in Grayscale on the Advanced tab. See "Advanced Tab" on page 7. 1 Check the print cartridges status. See "Print Cartridge Status" on page 25. 2 If you are running out of ink, replace the print cartridge. See "Replacing Print Cartridges" on page 27. You may need to clean the print cartridges. See "Cleaning Print Cartridges" on page 30. 42