HP Dv3-1075us HP Pavilion dv3 Entertainment PC - Maintenance and Service Guide - Page 44

Memory module, of the cover, swing it up and forward, and remove the cover

Get HP Dv3-1075us - Pavilion Entertainment - Turion X2 2.1 GHz PDF manuals and user guides
UPC - 884420737087
View all HP Dv3-1075us manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Memory module Description 4096-MB (PC2-6400, 800-MHz, DDR2) 2048-MB (PC2-6400, 800-MHz, DDR2) 1024-MB (PC2-6400, 800-MHz, DDR2) Spare part number 506934-001 506933-001 506932-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). Remove the memory module: 1. Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the memory module compartment cover to the computer. 2. Lift the rear edge (2) of the cover, swing it up and forward, and remove the cover (3). The memory module compartment cover is included in the Plastics Kit, spare part number 506953-001. 3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) 36 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
Memory module
Description
Spare part number
4096-MB (PC2-6400, 800-MHz, DDR2)
506934-001
2048-MB (PC2-6400, 800-MHz, DDR2)
506933-001
1024-MB (PC2-6400, 800-MHz, DDR2)
506932-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
32
).
Remove the memory module:
1.
Loosen the two Phillips PM2.5×6.0 captive screws
(1)
that secure the memory module
compartment cover to the computer.
2.
Lift the rear edge
(2)
of the cover, swing it up and forward, and remove the cover
(3)
. The memory
module compartment cover is included in the Plastics Kit, spare part number 506953-001.
3.
Spread the retaining tabs
(1)
on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
36
Chapter 4
Removal and replacement procedures