HP Dv3-1075us HP Pavilion dv3 Entertainment PC - Maintenance and Service Guide - Page 51
Display assembly, down through the channel
UPC - 884420737087
View all HP Dv3-1075us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Display assembly Description 13.3-inch, WXGA BrightView display assembly (includes camera/microphone module, camera/ microphone module cable, 2 microphones, and 3 wireless antenna transceivers and cables) Spare part number 506155-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 33). 6. Remove the keyboard and switch cover (see Keyboard and switch cover on page 40). Remove the display assembly: 1. Close the computer. 2. Turn the computer upside down. 3. Pull the WLAN antenna cables (1) down through the channel (2) located between the base enclosure (3) and the top cover on the opposite side. 4. Turn the computer right-side up. 5. Open the computer as far as possible. 6. Remove the WLAN antenna cables (1) from the clips and routing channel built into the top cover. Component replacement procedures 43