HP Dv7-3060us HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 53

Memory module Removal and replacement procedures Description 4096-MB (DDR3, 1066-MHz) 2048-MB (DDR3, 1066-MHz) 1024-MB (DDR3, 1066-MHz) Spare part number 575480-001 575479-001 575478-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). 5. Remove the primary hard drive cover (see "Primary hard drive cover" on page 4-9). Remove the memory module: ✎ The top memory module slot is for extension memory and the bottom slot is for primary memory. 1. Spread the retaining tabs 1 on each side of the memory module to release the memory module. (The edge of the module opposite the slot rises away from the computer.) 2. Remove the memory module 2 by pulling the module away from the slot at an angle. ✎ Memory modules are designed with a notch 3 to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. Maintenance and Service Guide 4-17