HP Dv7-3060us HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 54

Removal and replacement procedures TV tuner module ✎ The TV tuner module spare part kit does not include a TV tuner module cable. The TV tuner module cable is included in the Cable Kit, spare part number 516328-001. ✎ The TV tuner external antenna cables are available using spare part numbers 482900-001 (with F-PAL jack) and 482900-002 (with PAL jack). Description DVB-T TV tuner module DVB-T/ANG TV tuner module ATSC/NTSC/QAM hybrid TV tuner module Spare part number 482899-003 482899-002 482899-001 Before removing the TV tuner module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). 5. Remove the secondary hard drive cover (see "Secondary hard drive cover" on page 4-10). Remove the TV tuner module: 1. Disconnect the TV tuner module antenna cable 1 from the terminal on the TV tuner module. 2. Remove the Phillips PM2.0×4.0 screw 2 that secures the TV tuner module to the computer. (The edge of the module opposite the slot rises away from the computer.) 3. Remove the TV tuner module 3. ✎ The TV tuner module is designed with a notch 4 to prevent incorrect insertion into the TV tuner module slot. Reverse this procedure to install the TV tuner module. 4-18 Maintenance and Service Guide