HP ENVY 15-k300 Maintenance and Service Guide - Page 69

Optical drive connector, Remove the optical drive connector board

Get HP ENVY 15-k300 PDF manuals and user guides View all HP ENVY 15-k300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Optical drive connector NOTE: The optical drive connector and cable are included in the optical drive spare part kit. (See Optical drive on page 38 for the spare part kit information.) Before removing the optical drive connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the optical drive (see Optical drive on page 38). 6. Remove the base enclosure and top cover (see Base enclosure on page 41). Remove the optical drive connector board: ▲ Disconnect the cable from the ZIF connector (1), and then disconnect the optical drive connector (2) from the tabs to remove it. Reverse this procedure to install the optical drive connector board. Component replacement procedures 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Optical drive connector
NOTE:
The optical drive connector and cable are included in the optical drive spare part kit. (See
Optical
drive
on page
38
for the spare part kit information.)
Before removing the optical drive connector board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
37
).
5.
Remove the optical drive (see
Optical drive
on page
38
).
6.
Remove the base enclosure and top cover (see
Base enclosure
on page
41
).
Remove the optical drive connector board:
▲
Disconnect the cable from the ZIF connector
(1)
, and then disconnect the optical drive connector
(2)
from the tabs to remove it.
Reverse this procedure to install the optical drive connector board.
Component replacement procedures
59