HP ENVY 15-u400 Maintenance and Service Guide - Page 55
Remove the two nuts, Hard drive cable
View all HP ENVY 15-u400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Remove the system board: 1. Disconnect the following cables from the system board: (1): Power button board cable (2): Left display cable (3): Power connector cable (4): Right display cable (5): Fan cable (6): USB/audio cable (7): Hard drive cable 2. Remove the two nuts (1) that secure the system board to the computer. 3. Remove the five Phillips PM2.5×4.0 screws (2) that secure the system board to the computer. Component replacement procedures 47
Remove the system board:
1.
Disconnect the following cables from the system board:
(1):
Power button board cable
(2):
Left display cable
(3):
Power connector cable
(4):
Right display cable
(5):
Fan cable
(6):
USB/audio cable
(7):
Hard drive cable
2.
Remove the two nuts
(1)
that secure the system board to the computer.
3.
Remove the five Phillips PM2.5×4.0 screws
(2)
that secure the system board to the computer.
Component replacement procedures
47