HP ENVY 15-u400 Maintenance and Service Guide - Page 67

Lift the tape that secures the antenna cables to the bottom of the display enclosure

Get HP ENVY 15-u400 PDF manuals and user guides View all HP ENVY 15-u400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

7. The hinge covers are installed on the display hinges. To remove the display hinge covers: NOTE: The display hinge covers are available using spare part number 774597-001. a. From the inside of the hinge covers, remove the two Phillips PM2.0×3.0 screws (one per hinge) (1) that secure the hinge covers to the hinges. b. Pull the hinge covers off the hinges (2). 8. The antenna cables are installed in the display enclosure. To remove the antenna cables: NOTE: The antenna cables are available using spare part number 774590-001. a. Lift the tape that secures the antenna cables to the bottom of the display enclosure (1). b. Remove the cables from the clips built into the enclosure (2). c. Lift the tape that secures the transceivers at the top of the display (3), and then remove the antenna cables from the display enclosure (4). Component replacement procedures 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
7.
The hinge covers are installed on the display hinges. To remove the display hinge covers:
NOTE:
The display hinge covers are available using spare part number 774597-001.
a.
From the inside of the hinge covers, remove the two Phillips PM2.0×3.0 screws (one per hinge)
(1)
that secure the hinge covers to the hinges.
b.
Pull the hinge covers off the hinges
(2)
.
8.
The antenna cables are installed in the display enclosure. To remove the antenna cables:
NOTE:
The antenna cables are available using spare part number 774590-001.
a.
Lift the tape that secures the antenna cables to the bottom of the display enclosure
(1)
.
b.
Remove the cables from the clips built into the enclosure
(2)
.
c.
Lift the tape that secures the transceivers at the top of the display
(3)
, and then remove the
antenna cables from the display enclosure
(4)
.
Component replacement procedures
59