HP ENVY Ultrabook CTO 6t-1000 HP Envy 6 Maintenance and Service Guide - Page 69
Power button board, Remove the speakers
View all HP ENVY Ultrabook CTO 6t-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Remove the speakers: 1. Turn the computer, with the front edge toward you. 2. Release the 2 Phillips PM 2.0×3.0 screws securing each speaker. (1) 3. Remove the speakers and cables (2). Reverse this procedure to install the speakers. Power button board Description Power button board Spare part number 688003-001 Before removing the Power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 32). 5. Remove the base enclosure (see Base enclosure on page 34). 6. Disconnect the battery cable (see Battery on page 36). Component replacement procedures 61