HP ENVY m6-w000 Maintenance and Service Guide - Page 40
Hard drive, Remove the top cover see
View all HP ENVY m6-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Hard drive NOTE: The Hard Drive Hardware Kit, spare part number 808238-001, includes the hard drive bracket and hard drive connector cable. Description 1-TB, 5400-rpm, 7 mm 750 GB, 5400 rpm hard drive, 7 mm 500-GB, 5400-rpm, 7 mm, hybrid 8 GB SSD 500-GB, 5400-rpm, 7 mm Hard Drive Hardware Kit (includes hard drive bracket and connector cable) Spare part number 762990-005 752099-005 732000-005 778186-005 808238-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the top cover (see Top cover on page 27). 5. Disconnect the battery. Remove the hard drive: 1. Disconnect the hard drive connector cable (1) from the system board. 30 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts