HP EliteDesk 800 95W G4 Maintenance and Service Guide - Page 91
POST numeric codes and text messages, Control panel message, Description, Recommended action
View all HP EliteDesk 800 95W G4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Control panel message 008-Microcode Patch Error 009-PMM Allocation Error during MEBx Download 00A-Product Information Not Valid 00B-MEBx Module did not checksum correctly 00C-PMM Deallocation Error during MEBx Cleanup 00D-Setup Error during MEBx Execution Description RTC (real-time clock) battery may need to be replaced. Processor is not supported by the BIOS. Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. The product information programmed into the system board is missing or invalid. Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. MEBx selection or exit resulted in a setup failure. Recommended action problem persists, replace the RTC battery. See the Removal and Replacement section for instructions on installing a new battery. 1. Upgrade BIOS to proper version. 2. Change the processor. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the computer, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. Use Computer Setup to update this information. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. POST numeric codes and text messages 83