HP EliteDesk 800 G4 Hardware Reference Guide - Page 40
Installing a 2.5-inch hard drive
View all HP EliteDesk 800 G4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installing a 2.5-inch hard drive 1. Prepare the computer for disassembly. See Preparing for disassembly on page 4. 2. If the computer is on a stand, remove the computer from the stand. 3. Remove the computer access panel. See Removing the computer access panel on page 5. 4. Remove the front bezel. 5. Install four black-and-blue M3 mounting screws (two on each side of the drive). NOTE: M3 metric mounting screws can be purchased from HP. When replacing a drive, transfer the four mounting screws from the old drive to the new drive. 34 Chapter 2 Hardware upgrades
Installing a 2.5-inch hard drive
1.
Prepare the computer for disassembly. See
Preparing for disassembly
on page
4
.
2.
If the computer is on a stand, remove the computer from the stand.
3.
Remove the computer access panel. See
Removing the computer access panel
on page
5
.
4.
Remove the front bezel.
5.
Install four black-and-blue M3 mounting screws (two on each side of the drive).
NOTE:
M3 metric mounting screws can be purchased from HP.
When replacing a drive, transfer the four mounting screws from the old drive to the new drive.
34
Chapter 2
Hardware upgrades