HP Fortis 11 inch G9 Q Chromebook Maintenance and Service Guide - Page 33

The bezel is secured with adhesive. When replacing the bezel, be sure to replace the adhesive

Get HP Fortis 11 inch G9 Q Chromebook PDF manuals and user guides View all HP Fortis 11 inch G9 Q Chromebook manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Table 5-3 Display subcomponent descriptions and part numbers (continued) Description Display panel, FHD, 300 nits Display panel, FHD, 300 nits, 144 Hz Display panel, QHD, 300 nits, 165 Hz Top bracket Camera module Spare part number N13806-001 N13807-001 N13808-001 N14108-001 N14112-001 Before removing the display subcomponents, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 24). 2. Remove the bottom cover (see Bottom cover on page 24). 3. Disconnect the battery cable from the system board (see Battery on page 25). Remove the display subcomponents: 1. Open the computer to 180° (1). 2. Use a tool to release the top, left and right sides, and then bottom of the bezel (2). 3. Use a tool to release the hinge cover from the computer (3). 4. Remove the bezel (4). NOTE: The bezel is secured with adhesive. When replacing the bezel, be sure to replace the adhesive, which is available in the display adhesive kit as spare part number N14114-001. 5. To remove the display panel: a. Remove the four Phillips M 2.0 × 2.5 screws (1) from the display side panel bracket. 28 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Table 5-3
Display subcomponent descriptions and part numbers
(continued)
Description
Spare part number
Display panel, FHD, 300 nits
N13806-001
Display panel, FHD, 300 nits, 144 Hz
N13807-001
Display panel, QHD, 300 nits, 165 Hz
N13808-001
Top bracket
N14108-001
Camera module
N14112-001
Before removing the display subcomponents, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
24
).
2.
Remove the bottom cover (see
Bottom cover
on page
24
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
25
).
Remove the display subcomponents:
1.
Open the computer to 180°
(1)
.
2.
Use a tool to release the top, left and right sides, and then bottom of the bezel
(2)
.
3.
Use a tool to release the hinge cover from the computer
(3)
.
4.
Remove the bezel
(4)
.
NOTE:
The bezel is secured with adhesive. When replacing the bezel, be sure to replace the adhesive,
which is available in the display adhesive kit as spare part number N14114-001.
5.
To remove the display panel:
a.
Remove the four Phillips M 2.0 × 2.5 screws
(1)
from the display side panel bracket.
28
Chapter 5
Removal and replacement procedures for authorized service provider parts