HP Fortis x360 11 inch G3 J Chromebook Maintenance and Service Guide - Page 40
WLAN module, Remove the Phillips M2.0 × 2.9 screw
View all HP Fortis x360 11 inch G3 J Chromebook manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2. Remove the battery from the computer. To replace the battery, reverse the removal procedures. WLAN module To remove the WLAN module, use this procedure and illustration. Table 5-9 WLAN module descriptions and part numbers Description WLAN module (Intel Wi-Fi 6 AX211 + Bluetooth 5.2) WLAN bracket (included in the Bracket Kit) Spare part number L92724-005 N38891-001 IMPORTANT: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 25). 2. Remove the top cover with keyboard (see Top cover with keyboard on page 25). 3. Disconnect the battery cable from the system board (see Battery on page 33). Remove the WLAN module: 1. Remove the Phillips M2.0 × 2.9 screw (1) that secures the WLAN module to the system board. (The WLAN module tilts up.) 2. Remove the WLAN bracket (2). 3. Disconnect the two WLAN antenna cables (3) from the terminals on the WLAN module. 4. Release the shielding (4) that secures the WLAN module to the slot. WLAN module 35