HP Fortis x360 11 inch G3 J Chromebook Maintenance and Service Guide - Page 41

USB board cables, To install the WLAN module, reverse this procedure.

Page 41 highlights

5. Remove the WLAN module (5) by pulling the module away from the slot at an angle. NOTE: When connecting the antenna cables, be sure to match the number or letter on the cable with the appropriate connector on the module. 6. If the WLAN antenna is not connected to the terminal on the WLAN module, you must install a protective sleeve on the antenna connector, as shown in the following illustration. To install the WLAN module, reverse this procedure. USB board cables To remove the USB board cables, use these procedures and illustrations. 36 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

5.
Remove the WLAN module
(5)
by pulling the module away from the slot at an angle.
NOTE:
When connecting the antenna cables, be sure to match the number or letter on the cable
with the appropriate connector on the module.
6.
If the WLAN antenna is not connected to the terminal on the WLAN module, you must install a
protective sleeve on the antenna connector, as shown in the following illustration.
To install the WLAN module, reverse this procedure.
USB board cables
To remove the USB board cables, use these procedures and illustrations.
36
Chapter 5
Removal and replacement procedures for authorized service provider parts