HP Hw6515 HP iPAQ hw6500 Mobile Messenger Series Product Maintenance Guide - Page 9

430524-001.book Page 5 Tuesday, May 2, 2006 2:05 PM Charging/Communications Port The bottom of the HP iPAQ has a Charging/Communications Port, which consists of a 22-pin connector. The 22-pin connector is used to connect the HP iPAQ to a synchronization cable, cradle and the AC Charger Adapter. If the 22-pin connector becomes damaged, you will not be able to power on or communicate to the device. Therefore with your device face up: • Be sure that the 3 arrows (triangles) side of the adapter is face up before inserting it into the connector. • Press the sides at the end of the AC Adapter when inserting or removing it from the Charging/Communications Port. • Keep the device away from objects that may damage the connector. Battery Life Depending on your frequency of use, it is recommended that you fully charge and recharge your battery regularly. If you use your HP iPAQ often throughout the day for e-mail, phone conversations, GPS navigation and computing, you should recharge your battery regularly throughout the day. If you use your device moderately throughout the day for phone conversations and personal computing, you should be sure to charge your device fully each day. Your HP iPAQ uses some power to maintain files in RAM and the clock. While working at your desk, keep your HP iPAQ and AC Adapter connected via the HP iPAQ Cradle. When you travel, it is recommended that you carry the AC Adapter, Charger Adapter plug, or an optional spare battery with you. 5