HP Integrity BL60p User Service Guide, Second Edition - HP Integrity BL60p Ser - Page 108

Operating System Boot and Shutdown Boot and Shut Down HP-UX The file system number might change each time it is mapped (for example, when the system boots, or when the map -r command is issued). Step 4. When accessing the EFI System Partition for the desired boot device, issue the HPUX command to initiate the HPUX.EFI loader on the device you are accessing. The full path for the loader is \EFI\HPUX\HPUX.EFI. When initiated, the loader references the \EFI\HPUX\AUTO file and proceeds to boot HP-UX using the default boot behavior specified in the AUTO file. You have 10 seconds to interrupt the automatic booting of the default boot behavior. Pressing any key during this 10-second period stops the HP-UX boot process and enables you to interact with the HPUX.EFI loader. To exit the loader (the HPUX> prompt) enter exit (this returns you to the EFI Shell). To boot the HP-UX operating system, do not type anything during the 10-second period given for stopping at the HPUX.EFI loader. Shell> map Device mapping table fs0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000) blk0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0) blk1 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000) blk2 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part2,Sig72550000) blk3 : Acpi(000222F0,2A8)/Pci(0|0)/Scsi(Pun8,Lun0) blk4 : Acpi(000222F0,2A8)/Pci(0|1)/Scsi(Pun2,Lun0) Shell> fs0: fs0:\> hpux (c) Copyright 1990-2002, Hewlett Packard Company. All rights reserved HP-UX Boot Loader for IA64 Revision 1.723 Press Any Key to interrupt Autoboot \efi\hpux\AUTO ==> boot vmunix Seconds left till autoboot - 9 Step 5. Exit the console and iLO MP interfaces when finished using them. Press Ctrl+B to exit the system console and return to the MP Main Menu. To exit the MP, type X at the Main Menu. HP-UX Single-User Mode Boot Use the following procedure to boot HP-UX in single-user mode. Boot HP-UX in Single-User Mode (EFI Shell) From the EFI Shell environment, boot in single-user mode by stopping the boot process at the HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>) and entering the boot -is vmunix command. Step 1. Access the EFI Shell environment for the system on which you want to boot HP-UX in single-user mode. Log in to the iLO MP and enter CO to choose the system console. Confirm that you are at the EFI Boot Manager menu (the main EFI menu) when accessing the console. If you are at another EFI menu, choose the Exit option from the submenus until you return to the screen with the EFI Boot Manager heading. 108 Appendix B