HP Integrity rx2800 HP Integrity rx2800 i2 2D Graphics Adapter Installation Gu - Page 18

# Include other Screen info here, including other SubSections EndSection The first Screen section maps the screen Screen 0-1 to the physical device ATI FireMV 2250(0-1). The second Screen section maps the screen Screen 0-2 to the physical device ATI FireMV 2250(0-2). The third Screen section maps the Screen 2-1 to the physical device ATI FireMV 2250(2-1). Once you have the Screen sections set up, you can set up the ServerLayout section. The ServerLayout section uses the Identifier field that was defined for each of the Screen sections. The ServerLayout section describes all of the screens used by the Xserver. The ServerLayout section for this example follows: Section ServerLayout Identifier "Main Layout" Screen 0 "Screen 0-1" 0 0 Screen 1 "Screen 0-2" RightOf "Screen 0-1" Screen 2 "Screen 1-1" RightOf "Screen 0-2" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection This ServerLayout has three (3) screens associated with it. These screens are accessed through the 0.0, 0.1 and 0.2 displays. The first screen is associated with the Screen 0-1 section and is the anchor screen (at location 0, 0). The second screen is associated with the Screen 0-2 section and its screen coordinates are to the right of the first screen. The third screen is associated with the Screen 1-1 section and its screen coordinates are to the right of the second screen. Messages Xserver messages are typically logged to /var/X11/Xserver/logs. The two files that contain the messages are: /var/X11/Xserver/logs/XF86.*.log /var/X11/Xserver/logs/Xstartup.*.log Where * is the display instance of the Xserver, which is usually 0. The Xstartup.*.log file contains messages from the X loader. The XF86.*.log file contains messages from the XF86 Xserver. The XF86.*.log file is the file that should be checked first, should problems arise. 18 HP-UX Configuration