HP J7934A HP Jetdirect Administrator's Guide - Page 122
Other Settings, Support, Other, Links - jetdirect firmware update
UPC - 829160279466
View all HP J7934A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Table 4.7 SNMP Settings (2 of 2) Item Disable SNMPv1/v2 Enable SNMPv3 Description This option disables the SNMP v1/v2c agents on the print server, which is recommended for secure environments. If SNMP v1/v2c is disabled, some port monitors or discovery utilities may not operate properly. (Full-featured HP Jetdirect print servers only) This option enables (check) or disables (clear) the SNMP v3 agent on the print server. When enabled, an SNMP v3 account must be created on the print server, and the account information must be implemented on the SNMP v3 management application. You may create an account by providing the following information: User Name: the SNMP v3 account user name. Authentication Key: a 16-byte hexadecimal value for authenticating the SNMP packet contents using the Message Digest Algorithm 5 (MD5, RFC 1321). Privacy Key: a 16-byte hexadecimal value for encrypting the data portion of the SNMP packet using the Data Encryption Standard (DES) algorithm. Context Name: the view context in which this user can access SNMP objects. It is always "Jetdirect". Other Settings This item provides access to a variety of management and printing configuration options. The following tabs are provided: ● Misc. Settings: for enabling miscellaneous advanced protocols and functions ● Firmware Upgrade: to update your HP Jetdirect print server with new features and enhancements (model ew2400 upgrade features are limited and require a wired network connection) ● LPD Queues: for setting up print queues used in printing under LPD (line printer daemon) printing services ● USB Settings: (external print servers only) to configure Universal Serial Bus connection parameters ● Support Info: to set up the Support link located under Other Links in the left margin ● Refresh Rate: to set the time interval (in seconds) for embedded Web diagnostic page updates ENWW Using the Embedded Web Server 122