HP J7934A HP Jetdirect Administrator's Guide - Page 92
Table 3.4, Telnet Commands and Parameters 14 of 18, TCP/IP Configuration 92
UPC - 829160279466
View all HP J7934A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Table 3.4 Telnet Commands and Parameters (14 of 18) ipx-frametype Specifies the IPX frame type settings available for your print server model: AUTO (default), EN_SNAP, EN_8022, EN_8023, EN_II. For more information, see Chapter 9. ipx-sapinterval Specifies the time interval (1 to 3600 seconds) that the HP Jetdirect print server waits between Service Advertising Protocol (SAP) broadcasts on the network. The default is 60 seconds. 0 disables SAP broadcasts. ipx-mode (Read-only parameter) Specifies the NetWare mode configured on the print server, either RPRINTER or QSERVER mode. ipx-nds-tree An alphanumeric string, up to 31 characters, that specifies the NDS tree name for the print server. ipx-nds-context An alphanumeric string, up to 256 characters, that specifies the NDS context for the HP Jetdirect print server. ipx-job-poll Specifies the time interval (1 to 255 seconds) that the HP Jetdirect print server will wait to check for print jobs in a print queue. The default is 2 seconds. pjl-banner ipx-banner Enables or disables printing an IPX banner page through Printer Job Language (PJL). 0 disables banner pages. 1 (default) enables banner pages. pjl-eoj ipx-eoj Enables or disables IPX end-of-job notification through PJL. 0 disables, 1 (default) enables. pjl-toner-low ipx-toner-low Enables or disables IPX toner-low notification through PJL. 0 disables, 1 (default) enables. AppleTalk Command Description appletalk Enables or disables AppleTalk (EtherTalk) protocol operation on the print server. 0 disables, 1 (default) enables. For example, appletalk 0 will disable AppleTalk operation name-override (External print servers only) Specifies the name of the AppleTalk network. Up to 32 characters may be used. Name (Read-only parameter) The name of the printer on the AppleTalk network. A number after the name indicates that there are multiple devices with this name, and this is the Nth instance of the name. Print Type (Read-only parameter) Specifies the AppleTalk network printer type reported by the Jetdirect print server. Up to three print types may be reported. Zone (Read-only parameter) The name of the AppleTalk network zone on which the printer is located. Phase (Read-only parameter) AppleTalk phase 2 (P2) is preconfigured on the HP Jetdirect print server. ENWW TCP/IP Configuration 92