HP J7934A HP Jetdirect Administrator's Guide - Page 94
Table 3.4, Telnet Commands and Parameters 16 of 18, TCP/IP Configuration 94
UPC - 829160279466
View all HP J7934A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Table 3.4 Telnet Commands and Parameters (16 of 18) webscan-config (Web Scan Config) Enables or disables the Web Scan feature on the print server when connected to a supported device. 0 disables, 1 (default) enables. scan-idle-timeout Specifies the number of seconds (1 - 3600) that an idle scan connection is allowed to remain open. 0 disables the timeout. The default is 300 seconds. scan-email-config (Email Scan Config) Enable or disable the scan-to-email feature in the Web Scan server. 0 disables, 1 (default) enables. MFP-config (MFP config) Enable or disable print server support of the client software provided with your multifunction or all-in-one peripheral. 0 (default): disables client software support (allows printing only). 1: enables client software support (allows printing and scanning). usb-mode Specifies the communication mode over the USB port on the HP Jetdirect print server. ● Auto (default): Automatically negotiates and sets the highest communication mode possible for the attached printer or device. ● MLC: (Multiple Logical Channels) An HP-proprietary communication mode that allows multiple channels of simultaneous print, scan and status communications. ● BIDIR: A standard connection that supports bi-directional communications between the printer and print server. The print server sends print data and receives status from the printer. ● UNIDIR: A standard connection in which data is transferred in one direction only (to the printer). usb-speed (Read-only parameter, USB 2.0 products only) Specifies the autonegotiated communication speed over the USB connection between the HP Jetdirect print server and the device. ● Full Speed: 12 Mbits/sec as specified in the USB v2.0 specifications, compatible with USB v1.1 specifications. ● Hi-Speed: 480 Mbits/sec for USB v2.0 devices only. ● Disconnected: The USB port is not connected. ENWW TCP/IP Configuration 94