HP J7934A HP Jetdirect Administrator's Guide - Page 99
Using the Printer Control Panel
UPC - 829160279466
View all HP J7934A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Using the Printer Control Panel When supported by the printer, HP Jetdirect internal print servers provide a configuration menu that can be accessed from the printer's control panel. Using this menu, you can enable or disable network protocols and set basic network parameters. Note For instructions on using the control panel for your printer, refer to your printer documentation. When accessing the HP Jetdirect menu from the printer's control panel, you can set the following TCP/IP network configuration parameters: ● IP host name ● DHCP lease behavior (release or renew) ● IP address of the print server ● Subnet mask ● Default gateway address ● Syslog server address ● Idle timeout period If you need to configure more TCP/IP parameters than allowed by control panel configuration, use an alternate configuration tool (such as Telnet or the embedded Web server) as described in this chapter. If the HP Jetdirect print server is configured with TCP/IP parameters from the printer control panel, the configuration is saved on the print server when powered off/on. ENWW TCP/IP Configuration 99