HP Kayak XU 04xx HP Kayak XU and XW Series U3 and W3 PC Workstations - User Gu - Page 127

crystal.bk : cryst-4.fb4, Monday, March 23, 1998, 09 AM

Get HP Kayak XU 04xx PDF manuals and user guides View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 127 highlights

crystal.bk : cryst-4.fb4 Page 111 Monday, March 23, 1998 4:09 AM 4 Technical Information Configuring a SCSI Accessory • Plug and Play Scam Support When enabled, this option automatically configures Plug and Play compatible SCSI devices. For SCSI devices that do not support Plug and Play, set this option to Disabled. By default, it is enabled. • Extended BIOS Translation for DOS Drives >1 GByte This option is no longer used (and must always be "Enabled"). • Reset SCSI Bus at IC Initialization When the SCSI controller receives an IC Reset command from the central processor, it can reset either itself and the SCSI bus, or just itself. By default, it will reset both itself and the SCSI bus. • Host Adapter BIOS This option enables or disables the SCSI Adapter BIOS. Several options in SCSISelect utility are only valid if the SCSI adapter BIOS is enabled. The SCSI adapter BIOS must be enabled if the computer boots from a SCSI hard disk drive. This option is enabled by default. • Support Removable Disks Under BIOS as Fixed Disks When Boot Only is selected, only the removable media drive designated as the boot device is treated as a hard disk drive. If All Disks is selected, all removable-media drives supported by the BIOS are treated as hard disk drives. No removable-media drives are treated as hard disk drives when Disabled is selected. In this case, removable-media drives must be controlled through operating system drivers. • Display Message During BIOS Initialization When enabled, this option displays the message Press for SCSISelect(TM) Utility during BIOS initialization. When disabled, this message is not displayed, although you can still press the key for the SCSISelect utility. This option is enabled by default. • BIOS Support for Bootable CD-ROM When enabled, this option provides BIOS support for booting from a CD-ROM drive. It is enabled by default. • BIOS Support for Int13 Extensions When enabled, this option provides BIOS support for hard disk drives with more than 1024 cylinders. It is enabled by default. English 111

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
English
111
4
Technical Information
Configuring a SCSI Accessory
•
Plug and Play Scam Support
When enabled, this option automatically configures Plug and Play
compatible SCSI devices. For SCSI devices that do not support Plug
and Play, set this option to
Disabled
. By default, it is enabled.
•
Extended BIOS Translation for DOS Drives >1 GByte
This option is no longer used (and must always be “Enabled”).
•
Reset SCSI Bus at IC Initialization
When the SCSI controller receives an IC Reset command from the
central processor, it can reset either itself and the SCSI bus, or just
itself. By default, it will reset both itself and the SCSI bus.
•
Host Adapter BIOS
This option enables or disables the SCSI Adapter BIOS. Several
options in
SCSISelect
utility are only valid if the SCSI adapter BIOS
is enabled. The SCSI adapter BIOS must be enabled if the computer
boots from a SCSI hard disk drive. This option is enabled by default.
•
Support Removable Disks Under BIOS as Fixed Disks
When
Boot Only
is selected, only the removable media drive
designated as the boot device is treated as a hard disk drive.
If
All Disks
is selected, all removable-media drives supported by
the BIOS are treated as hard disk drives. No removable-media drives
are treated as hard disk drives when
Disabled
is selected. In this
case, removable-media drives must be controlled through operating
system drivers.
•
Display <F6> Message During BIOS Initialization
When enabled, this option displays the message
Press <F6> for
SCSISelect(TM) Utility
during BIOS initialization. When
disabled, this message is not displayed, although you can still press
the
key for the
SCSISelect
utility. This option is enabled by
default.
•
BIOS Support for Bootable CD-ROM
When enabled, this option provides BIOS support for booting from a
CD-ROM drive. It is enabled by default.
•
BIOS Support for Int13 Extensions
When enabled, this option provides BIOS support for hard disk
drives with more than 1024 cylinders. It is enabled by default.
crystal.bk : cryst-4.fb4
Page 111
Monday, March 23, 1998
4:09 AM