HP Kayak XU 04xx HP Kayak XU and XW Series U3 and W3 PC Workstations - User Gu - Page 62

crystal.bk : cryst-2.fb4 Page 46 Monday, March 23, 1998 4:09 AM 2 How to Install Accessories Inside Your PC Workstation Installing Mass Storage Devices 12 Replace the HP UltraFlow airflow guide and reconnect the fan to the system board (see the illustration on page 29). 13 Install any other accessories before replacing the cover and completing the installation. 14 Follow the instructions below to complete the installation. Completing the Installation of a Hard Disk Drive When a SCSI Hard Disk 1 Switch on the computer. Drive Is Installed 2 To ensure compatibility, use the FDISK utility to delete any partitions on the new hard disk. 3 Re-boot the computer. Refer to the operating system documentation for information on formatting a drive. When an IDE Drive Is Installed 1 Switch on the computer. 2 To display the device in POST, press re-starts. while the PC Workstation 3 If an error message appears, follow the instructions provided by the Error Message Utility. When prompted, press to run the Setup program. 4 Select the Advanced menu, and the IDE Devices submenu. In the Primary Master item, check that the details for the device have been correctly detected by the Setup program. 5 Press to save and exit Setup. Refer to the operating system documentation for information on formatting a drive. NOTE If an IDE drive is removed, switch on the computer. The system BIOS will detect that the device is missing. Press to confirm that you want to remove the device. The system configuration will be updated automatically. 46 English