HP Kayak XU 04xx HP Kayak XU and XW Series U3 and W3 PC Workstations - User Gu - Page 66
Installing Accessory Boards
![]() |
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
crystal.bk : cryst-2.fb4 Page 50 Monday, March 23, 1998 4:09 AM 2 How to Install Accessories Inside Your PC Workstation Installing Accessory Boards CAUTION NOTE Installing Accessory Boards Static electricity can damage electronic components. Turn OFF all equipment. Don't let your clothes touch the accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing the accessory from the bag. Handle the accessory as little as possible and with care. The PC Workstation has the following accessory board slots: • Slot AT 2 (the bottom slot) for full-length 16-bit ISA boards • Slot AT 1/PCI 4 for either a 16-bit ISA board or a full-length 32-bit PCI board • Slot PCI 3 can be used for a full-length 32-bit PCI board (and also features the RAIDport™ connector) • Slot PCI 2 for a full-length 32-bit PCI board • Slot PCI 1 for a full-length 32-bit PCI board • Slot AGP for the video adapter board Installing the Board 1 Disconnect the computer's power cord and any LAN connection or telecommunications cable. PCI boards are configured automatically when installed in the PC Workstation. 2 Remove the computer's cover ( "Removing and Replacing the Cover", on page 25) and carefully place the PC Workstation on its side. 3 Find an empty slot. refer to "System Connectors and Switches", on page 96. to identify the location of the slot type you want to use (ISA or PCI). Some boards may have preferred locations and special installation instructions detailed in their manuals. 50 English
![](/manual_guide/products/hewlettpackard-kayak-xu-04xx-hp-kayak-xu-xw-series-u3-w3-pc-workstations-user-guide-d569990001-9b228ac/66.png)