HP Kayak XU 04xx HP Kayak XU and XW Series U3 and W3 PC Workstations - User Gu - Page 40
Supported HP Accessories
![]() |
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
crystal.bk : cryst-2.fb4 Page 24 Monday, March 23, 1998 4:09 AM 2 How to Install Accessories Inside Your PC Workstation Supported HP Accessories Supported HP Accessories This chapter describes how to install memory, mass storage devices, and accessory boards in your computer. Internal Mass Storage Devices Main Memory Upgrades (DIMM slots for ECC SDRAM): - 32 MB (Non-buffered) - 64 MB (Non-buffered) - 128 MB (Non-buffered) - 256 MB (Registered - see note below) 5 Pairs of Rails for Front Access Devices: - 3.5-inch disk drive rails - 5.25-inch disk drive rails Up to six accessory boards can be installed: - One AGP slot (graphics) - Three 32-bit PCI slots (one used by SCSI/LAN board, one with RAIDport) - One combination PCI or ISA slot - One 16-bit ISA slot Front Access Drives, for example: - 3.5-inch 1.44 MB flexible disk drive (one third height) - 5.25-inch 1.2 MB flexible disk drive (half height) - 5.25-inch tape drive (half height) Contact your dealer for an up-to-date list of supported devices. NOTE 256 MB registered ECC SDRAM DIMMs cannot be used with non- buffered 32 MB, 64 MB or 128 MB DIMMs. 24 English
![](/manual_guide/products/hewlettpackard-kayak-xu-04xx-hp-kayak-xu-xw-series-u3-w3-pc-workstations-user-guide-d569990001-9b228ac/40.png)