HP LH4r HP Netserver LC 2000 Pedestal-to-Rack Guide - Page 17
Attaching the Column Adapters and Slides
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 2 Rack Mounting the HP NetServer Attaching the Column Adapters and Slides 1. Pull the anti-tip foot forward out of the bottom of the rack. See Figure 2-6 for the anti-tip foot location. 2. Align the left HP column adapter to the left front column as shown in Figure 2-5. 3. Match the column adapter holes (2nd & 14th) to the marks on the front column and place the column adapter mounting holes behind the column face. See Figure 2-5. 4. With the column adapter held in position, insert two screws (M5) through the holes in the column into the captive nuts on the column adapter. See Figure 2-5. 5. Repeat Steps 2 through 4 for the column adapter on the right front column. Slide Mount 14th Hole From Bottom Left Front Column Adapter Column Adapter Bottom of HP NetServer 2nd Hole From Bottom Figure 2-5. Mounting Column Adapter to Front Columns 13