HP LH4r HP Netserver LH 3/LH 3r Processor Upgrade Guide - Page 11
Extending the HP NetServer LH 3r from the Rack
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Chapter 1 Processor Module Installation Extending the HP NetServer LH 3r from the Rack Extend the NetServer chassis from the rack to access the cover panels and system board. WARNING Do not unscrew the NetServer until you have extended the anti-tip foot from under the front of the rack. This anti-tip device must be extended to prevent the rack and NetServer from tipping over, which could damage the NetServer and injure people. 1. Unscrew the NetServer chassis from the rack, as shown in Figure 1-4. Do not unscrew the entire hinge or bracket from the chassis; remove only the outer screws, so the hinge and the bracket remain attached to the NetServer chassis (see Figure 1-5). 2. Pull the NetServer forward from the rack until the lockout device engages with a click. Figure 1-4. Releasing the HP NetServer LH 3r Chassis From the Rack 7