HP LH4r HP Netserver LXr 8000 to LXr 8500 Upgrade Guide - Page 87
Reinstall Your NOS
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 8 Reinstalling Your NOS 3. Insert HP DiagTools Diskette #2, when prompted, and press F2. The Advanced System Tests menu appears. After various tests are initialized, the System Test submenu appears. NOTE Use the keyboard with the Advanced System Tests menus. They do not support a mouse. 4. Use the right arrow key to select Misc. from the Main menu. 5. Use the down arrow key to select Error Code Viewer and press Enter. You are prompted for the error code. 6. Type the error code identified in the Support Ticket and press Enter. The name of the error is displayed along with possible corrective actions. 7. Press Esc to return to the Advanced System Tests menu. Use HP DiagTools to Burn in the NetServer You can burn in the NetServer using DiagTools' repetitive tests. For complete information, see the instructions on batch testing in the readme file on HP DiagTools Diskette #1. Exit HP DiagTools and Take Corrective Action if Necessary 1. Press F3 to exit HP DiagTools from the Advanced System Tests menu or from any of the Basic System Test screens. 2. Remove the HP DiagTools diskette. 3. If you need to take corrective action, be sure to power down the NetServer before you remove covers. 4. If you need to contact an HP customer support representative, save your Support Ticket diskette. Reinstall Your NOS Reinstalling your NOS has two parts: l Prepare your boot drive by either repartitioning it, or by reinitializing your boot logical drive. l Install your NOS and configure your NetServer. 81