HP LJ476UT User Manual - Page 77
disconnect the card reader cable
View all HP LJ476UT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
10. To remove the top cover, pull up on the top of the top cover (1), pull upward on the left (2) and right sides (3), and then lift the bottom of the top cover (4) to remove it enough to access the card reader cable underneath. 11. Lift the front of the top cover slightly to gain access to the cable and connector underneath. 12. Lift the connector latch (1), disconnect the card reader cable (2), and then lift the top cover from the computer (3). Reverse this procedure to install the top cover. Component replacement procedures 69
10.
To remove the top cover, pull up on the top of the top cover
(1)
, pull upward on the left
(2)
and
right sides
(3)
, and then lift the bottom of the top cover
(4)
to remove it enough to access the
card reader cable underneath.
11.
Lift the front of the top cover slightly to gain access to the cable and connector underneath.
12.
Lift the connector latch
(1)
, disconnect the card reader cable
(2)
, and then lift the top cover from
the computer
(3)
.
Reverse this procedure to install the top cover.
Component replacement procedures
69