HP LP2065 HP LP1965 19", LP2065 20", and LP2465 24" LCD Monitor - Page 35

HP Display LiteSaver, Installing the HP Display LiteSaver Software

Get HP LP2065 - 20.1inch LCD Monitor PDF manuals and user guides
UPC - 882780206175
View all HP LP2065 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

NOTE: You must set the current local time before you reset the time for Sleep Time or On Time. Note that the time is displayed in a 24-hour clock format. For example, 1:15 p.m. is displayed as 13 hours 15 minutes. 5. Press the Menu button once to enter the adjustment mode for hours. 6. Press the - (Minus) or + (Plus) button to adjust the hour. 7. Press the Menu button again to enter the time for minutes. 8. Press the - (Minus) or + (Plus) button to adjust the minutes. 9. Press the Menu button to lock in the time chosen. 10. After setting the current time, the highlight automatically skips to Set Sleep Time hours. Repeat steps 6 through 9 to set Sleep Time. 11. If you do not want to set Sleep Time, press the Menu button twice, then select Save and Return to exit the menu. 12. After setting Sleep Time, the highlight automatically skips to Set On Time hours. Repeat steps 6 through 9 to set On Time. 13. Set the Timer mode to On to activate the Sleep Timer settings. 14. When you are finished, select Save and Return to exit the menu. The fifth selection, Sleep Now, turns the monitor backlights off immediately and stays in sleep mode until the next On Time activates or a monitor button is pressed. HP Display LiteSaver HP Display LiteSaver is a software application, available on the CD, that increases monitor life and saves energy. It allows you to place the monitor into its low power sleep mode at predefined times by shutting down or reducing power to most internal circuits. This helps protect the LCD panel against image retention. Image retention can occur when the monitor is left on while displaying the same image for an extended period of time, leaving a shadow of the image on the screen. Installing the HP Display LiteSaver Software 1. Insert the CD in the computer CD-ROM Drive. The CD menu is displayed. 2. Select Install HP Display LiteSaver Software. 3. After installing the software, click the HP Display LiteSaver icon in the Windows system tray or right-click the icon and select Configure from the pop-up menu. 4. Select the following options to configure the HP Display LiteSaver features: Table 4-3 HP Display LiteSaver Configuration Options Select This Option To Do This Enable Display LiteSaver Enables the HP Display LiteSaver functions; deselect to disable the HP Display LiteSaver. Display Off Sets the time when the monitor automatically turns off. This does not affect screen saver operation, which has priority over the HP Display LiteSaver. ENWW HP Display LiteSaver 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
NOTE:
You must set the current local time before you reset the time for
Sleep Time
or
On
Time
. Note that the time is displayed in a 24–hour clock format. For example, 1:15 p.m. is displayed
as 13 hours 15 minutes.
5.
Press the
Menu
button once to enter the adjustment mode for hours.
6.
Press the
-
(Minus) or
+
(Plus) button to adjust the hour.
7.
Press the
Menu
button again to enter the time for minutes.
8.
Press the
-
(Minus) or
+
(Plus) button to adjust the minutes.
9.
Press the
Menu
button to lock in the time chosen.
10.
After setting the current time, the highlight automatically skips to
Set Sleep Time hours
. Repeat
steps 6 through 9 to set
Sleep Time
.
11.
If you do not want to set
Sleep Time
, press the
Menu
button twice, then select
Save and
Return
to exit the menu.
12.
After setting
Sleep Time
, the highlight automatically skips to
Set On Time hours
. Repeat steps 6
through 9 to set
On Time
.
13.
Set the
Timer mode
to
On
to activate the
Sleep Timer
settings.
14.
When you are finished, select
Save and Return
to exit the menu.
The fifth selection,
Sleep Now
, turns the monitor backlights off immediately and stays in sleep mode
until the next
On Time
activates or a monitor button is pressed.
HP Display LiteSaver
HP Display LiteSaver is a software application, available on the CD, that increases monitor life and
saves energy. It allows you to place the monitor into its low power sleep mode at predefined times by
shutting down or reducing power to most internal circuits. This helps protect the LCD panel against
image retention. Image retention can occur when the monitor is left on while displaying the same image
for an extended period of time, leaving a shadow of the image on the screen.
Installing the HP Display LiteSaver Software
1.
Insert the CD in the computer CD-ROM Drive. The CD menu is displayed.
2.
Select
Install HP Display LiteSaver Software
.
3.
After installing the software, click the
HP Display LiteSaver
icon in the Windows system tray or
right-click the icon and select
Configure
from the pop-up menu.
4.
Select the following options to configure the HP Display LiteSaver features:
Table 4-3
HP Display LiteSaver Configuration Options
Select This Option
To Do This
Enable Display LiteSaver
Enables the HP Display LiteSaver functions; deselect to disable the HP Display
LiteSaver.
Display Off
Sets the time when the monitor automatically turns off. This does not affect screen
saver operation, which has priority over the HP Display LiteSaver.
ENWW
HP Display LiteSaver
27