HP LaserJet 9040/9050 Service Manual - Page 68
Rtt Min, Ping
View all HP LaserJet 9040/9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Item DIAGNOSTICS Options Values Explanation LOOPBACK YES TEST NO PING TEST DEST IP PACKET SIZE TIMEOUT COUNT PRINT RESULTS EXECUTE PING RESULTS PACKETS SENT PACKETS RECEIVED PERCENT LOST RTT MIN RTT MAX RTT AVE PING IN PROGRESS REFRESH CAUTION This test will erase your TCP/IP configuration. YES the loopback test will be initiated. NO the loopback test will not be initiated. Specify the IP address of the remote host. A valid IP address must be specified. Specify the size of each packet, in bytes, to be sent to the remote host. The minimum is 64 (default) and the maximum is 2,048. Specify the length of time, in seconds, to wait for a response from the remote host. The default is 1 and the maximum is 100. Specify the number of ping test packets to send for this test. Select a value from 1 to 100. To configure the test to run continuously, select 0. If the ping test was not set for continuous operation, you can choose to print the test results. Select YES to print results or NO. Specify whether to initiate the ping test. Select YES to initiate the test or NO. Determines the number of packets (0-65,535) that have been sent to the remote host since the most recent test was initiated or completed. Shows the number of packets (0-65,535) that have been received from the remote host since the most recent test was initiated or completed. Shows the percent of ping test packets that were sent with no response from the remote host since the most recent test was initiated or completed. Shows the minimum detected round-trip-time (RTT), from 0 to 4096 milliseconds, for packet transmission and response. Shows the maximum detected RTT, from 0 to 4096 milliseconds, for packet transmission and response. Shows the average detected RTT, from 0 to 4,096 milliseconds, for packet transmission and response. Shows whether or not a ping test is in progress. YES indicates a test in progress and NO indicates that a test completed or was not run. Updates the ping test data with current results. 52 Chapter 3 Product configuration