HP LaserJet Managed E60175 User Guide - Page 124
Print a cleaning Visually inspect the toner cartridge, go/learnaboutsupplies, Support Tools
View all HP LaserJet Managed E60175 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Step two: Check supplies status 1. Look at the supplies status report to check the percent of life remaining for the toner cartridge and, if applicable, the status of other replaceable maintenance parts. Print quality problems can occur when using a toner cartridge that is at its estimated end of life. The supplies status page indicates when a supply level is very low. After an HP supply has reached the very low threshold, HP's premium protection warranty on that supply has ended. The toner cartridge does not need to be replaced now unless the print quality is no longer acceptable. Consider having a replacement available to install when print quality is no longer acceptable. If you determine that you need to replace a toner cartridge or other replaceable maintenance parts, the supplies status page lists the genuine HP part numbers. 2. Check to see if you are using a genuine HP cartridge. A genuine HP toner cartridge has the word "HP" on it, or has the HP logo on it. For more information on identifying HP cartridges go to www.hp.com/go/learnaboutsupplies. Print a cleaning page During the printing process paper, toner, and dust particles can accumulate inside the printer and can cause printquality issues such as toner specks or spatter, smears, streaks, lines, or repeating marks. Follow these steps to clean the printer's paper path. 1. From the Home screen on the printer control panel, navigate to the Support Tools application, and then select the Support Tools icon. 2. Select the following menus: a. Maintenance b. Calibration/Cleaning c. Cleaning Page 3. Select Print to print the page. A Cleaning... message displays on the printer control panel. The cleaning process takes a few minutes to complete. Do not turn the printer off until the cleaning process has finished. When it is finished, discard the printed page. Visually inspect the toner cartridge NOTE: If the access door to the cartridge area is locked, contact your managed service provider for assistance with unlocking the door. Follow these steps to inspect the toner cartridge. 1. Remove the toner cartridge from the printer, and verify that the sealing tape has been removed. 2. Check the memory chip for damage. 3. Examine the surface of the green imaging drum. CAUTION: Do not touch the imaging drum. Fingerprints on the imaging drum can cause print-quality problems. 116 Chapter 6 Solve problems ENWW